Network Installation:

The Developers' Insight CD-ROM can be installed on most networks and has been 
fully tested on Windows* NT 3.51, Windows NT 4.0, Netware* 4.X, Lantastic* 5.0
and Banyan* as well as Windows 95 peer-to-peer.

The required space will vary depending on the cluster size of the network drive, 
and what is installed. The table below will provide the range of space that is 
required for the various installs.

	Type of install  | Range of space required
     --------------------+--------------------------
            Full         |   1400 - 1900 MB
	 Products Only   |    700 - 1000 MB
      Technologies Only  |    700 - 1000 MB

The time that is required for a full netowrk install will very depending on the 
speed of your network, CD-ROM drive, etc. A full network install may take up to
2 hours to complete.

Procedure:
   Full Install:
      1) Run the NETWORK.EXE program on the products disc.
      2) Enter the requested information.
      Note: If the installer indicates that there is insufficient free space on the 
            network drive but you believe that there is enough space, you may still 
            continue the installation.

   Products / Technologies only install.
      1) copy the appropriate CD-ROM disc to the network drive.
      Note: If this procedure is performed, when a notice is received to switch CDs
            the uninstalled information will not be available. 

*Other brands and names are the property of their respective owners.